FILTRACIÓN Filter Cartridges and pleated elements
The filter cartridges and pleated elements manufactured by IFIL AG are the perfect complement to the wide range of dust filtering elements supplied by ICT FILTRACIÓN.
This partnership provides fast, convenient access at highly competitive prices to products which are recognised as benchmarks on the market.
This Swiss company leads the world in the manufacture of high-performance pleated bags, with standard and custom-designed models and operating temperatures of up to 180ºC. Moreover, IFIL products in Spain have a distinctive added-value feature: the service commitment of ICT FILTRACIÓN through its ATAC (customer technical support service), which provides specialist support aimed at ensuring maximum performance to get the most out of the bags and cartridges in filtering systems.
Eco-Efficiency
- Maximum performance over a long life cycle.
- Minimisation and control of emissions.
- Products in accordance with market standards.
- Manufacturing to order.
- Different finishes to meet customer requirements (fluorocarbon treatment, PTFE membrane, antistatic, etc.).
- Maximum filtering surface in minimum space.
- Fixing systems with maximum seal security.
- Certificates in accordance with the various requirements on the market (FDA, ATEX, etc.).
MaxiAer Models
MaxiAer pleated textile filter elements are widely used to replace bags and their use requires a preliminary application study.
The MaxiAer range, made up of top-removal and bottom-removal models, offers different ways of modernising existing bag filters.
MaxiAer Eco-Efficiency
- Increased gas volume in the process of use of the filter.
- Δp friction loss reduction.
- Reduced mg/Nm³ emissions and increased filtration efficiency.
- Reduced clogging of the filter medium.
- Elimination of abrasion, especially at the bottom of the bags.
- Prolonged useful life for bags.
MaxiAer specifications
- Length: 80 – 3,000mm.
- Diameter: 80 – 570mm.
- Operating temperature range: from -40°C up to 180°C.
- Metal parts in galvanised steel, SS-304, SS-316, SS-304 and SS-316.
- FDA execution, certified validity for use with food and pharmaceutical products.
- Filtration materials available from stock with BGIA certificate, filters classed "M" and "H" for filtration efficiency and DEKRA certified antistatic. Electrical resistance: <105 Ohm/cm. In accordance with EN1822-Test. Filter class: HEPA H11-H13. ePTFE membrane. Various finishes: water-repellent, oil-repellent, flame-resistant, etc.
- Flexible manufacturing: from one piece up to long runs.
Helix filter tube models
Helix tubes are compact filters ideal for a wide variety of uses in dust filters. Their tubular shape means they take maximum advantage of the space available.
The models with an ePTFE membrane facilitate cleaning of the element and guarantee maximum filtering efficiency at all times. They can also be supplied without the membrane.
The small pressure differential they produce is one of the main advantages of this technology, especially in comparison with conventional filter elements with a rigid body based on sintered materials.
Conversion to the Helix compact filter system is very easy and opens up unprecedented possibilities for increasing on the capacity of conventional filters.
Helix specifications
- Length: 200 – 1,800mm.
- Diameters: 26, 30 and 45mm.
- Operating temperature range: from -40°C up to 130°C.
- Metal parts in galvanised steel, SS-304, SS-316, SS-304 and SS-316.
- FDA execution, certified validity for use with food and pharmaceutical products.
- Filtration materials available from stock with BGI certificate. Filter classed "M" and "H". DEKRA certified (examination). Electrical resistance <105 Ohm/cm. In accordance with EN1822-Test. Filter class HEPA H11-H13.
- Flexible manufacturing: from one piece up to long runs.
If your installation has filter elements of this kind and you would like a quotation for replacing them, please fill in the attached questionnaire.
OptiAer Models
Cartridge secured by means of a threaded rod. They are generally fitted from the dirty air chamber and feature a cover with a hole in the centre to fit the fixing system.
Several cartridges of this type can be joined together: in this case the middle cartridges will be open at both ends, with a rubber seal on each of the rubber parts to ensure control of emissions.
OptiAer Specifications
- Length: up to 2,000mm.
- Diameters: from 120 to 560mm.
- Operating temperature up to 180ºC.
- Metal parts in galvanised steel.
- Manufactured using FDA-certified materials.
- Manufactured using antistatic materials to comply with the ATEX directive.
- Materials with hydrophobic and oil-repellent treatments.
RapidAer Models
Cartridge secured by means of a clamp which may have 3 or 4 fixing points depending on the diameter of the filter element. This clamp may feature a venturi if the installation requires this.
This is the most common model in most dust capture installations with this filter system. They can be fitted through the clean air chamber or the dirty air chamber, which means that this model is supplied in TR (top removal) and BR (bottom removal) forms.
RapidAer Specifications
- Length: up to 2,000mm.
- Diameters: 145, 156, 218 and 325mm.
- Operating temperature: up to 180ºC.
- Clamps in polyamide, galvanised steel or aluminium.
- Manufactured using FDA-certified materials.
- Manufactured using antistatic materials to comply with the ATEX directive.
- Materials with hydrophobic and oil-repellent treatments.
Special cartridges
In order to cater for everybody, ICT FILTRACIÓN supplies special cartridges, including some with a screw fixing system, also manufactured by IFIL AG. Over 100 different designs, including conical shapes, to meet the needs of each customer’s installation.
Special cartidges specifications
- Different thread sizes.
- Manufactured in conical and cylindrical formats.
- Length: up to 2,000mm.
- Operating temperature: up to 180ºC.
- Manufactured using FDA-certified materials.
- Manufactured using antistatic materials to comply with the ATEX directive.
- Materials with hydrophobic and oil-repellent treatments.
ICT FILTRACIÓN guarantees the durability of bags through the PRO-RATA TEMPORIS system.
If you do not find what you are looking for please enquire about availability at our customer service department.
